4000 Bordentown Avenue- Suite 11
Sayreville, NJ 08872

July 2, 2019

Toilet Partition Dimensions

Toilet Partition Dimensions 1

Our experienced staff can assist with your design, specifications, and pricing needs.

SEARCH BLOG

In case you do not run a business with public restrooms you do not need to give too much thought about toilet partition dimensions. However, if you manage a commercial business with public toilets then it is very important to familiarize yourself with commercial toilet dimensions. You can only ensure the safety and make your toilet stalls compliant with OSHA and ADA requirements if you know the appropriate dimensions of the public restrooms. You have to comprehend that the toilet partition dimensions may not generally be adequate for a given facility. Only one out of every odd washroom has a similar measure of room or other physical elements. Consequently, some property supervisors may need to forsake the general restroom height, depth and width to modify bathroom partition dimensions. Regardless of whether you’re going with standard or custom measurements, it’s indispensable for you to guarantee that the commercial restroom complies with the local codes and government prerequisites. Are you looking for commercial restroom partitions? Get a quote now.

Most Common Toilet Partition Dimensions

Precise estimations are very important before ordering commercial restroom partitions for a business. On the off chance that you order the partitions with wrong measurements, you might think of cutting them to fit in the facility. This procedure isn’t just hard to do but it may even make the partitions useless because of the damage unless it is a plastic partition. A standard bathroom stall is 36’’ wide and 60’’ deep. These measurements may vary depending on the different characteristics of a facility. For a bathroom stall, minimum depth is 48’’ and as deep as 78 inches. To fulfill ADA prerequisites, all recently developed square bathroom stalls must have entryways that swing outward, without exceeding the diagonal by four inches. The toilet needs to be between 16 to 18 inches center from the nearest partition or wall. ADA approved compartments have to be 60’’ wide and 59’’ deep within. They additionally need a 36 or 34’’ door that can easily accommodate a wheelchair. Washroom compartments that allow ambulatory access must be at any rate 36’’ wide. A 34 inch handicap door is also required.

Our American Made Commercial Toilet Partitions

We at 10 Spec provide bathroom partitions that are made in United States and are ADA compliant. We are the nation’s ward winning toilet partition suppliers and our partitions are supported by standard warranties. In case you don’t know what sort of layout you need or toilet partition dimensions, we can connect one of our expert designers with you who will make a mock up structure and design without any charge. We also provide our customers with complimentary samples, which will help your decision making easier.

REQUEST A QUOTE TODAY

CALL AN EXPERT

Customer Satisfaction Guarantee

GUARANTEED SATISFACTION

At 10-Spec we stand behind our products and services with a 100% guarantee. Our job is not finished until you are completely satisfied.

Shopping Basket

REQUEST A QUOTE

DESCRIPTION OF REQUIRED WORK:






JOB NAME:

JOB CITY:

JOB STATE:

NAME:

EMAIL:

TELEPHONE:

MESSAGE:

UPLOAD DRAWINGS: